F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
17. Install new body bolts.
-
Tighten to 90 Nm (66 lb-ft).
18. NOTE: RH side shown, LH side similar.
If equipped, install the running boards and 18 bolts.
-
Tighten to 13 Nm (115 lb-in).
19. Connect the retaining clip for the transmission cooler tubes at the frame.
20. Position back the ground strap and install the bolt.
-
Tighten to 25 Nm (18 lb-ft).
21. Position back the transmission cooler tubes on the stud and install the nut.
-
Tighten to 9 Nm (80 lb-in).
