F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
21. NOTE: Install a new press-in-place gasket.
Install the crankcase vent oil separator and 4 bolts.
-
Tighten to 13 Nm (115 lb-in).
22. Connect the crankcase vent oil separator drain tube.
23. With the help of an assistant, install the hood and 4 bolts. Connect the hood lift rods.
-
Tighten to 13 Nm (115 lb-in).
24. Connect the underhood light electrical connector and pin-type retainers.