F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
9. Install the glow plug module bracket and 3 bolts.
-
Tighten to 13 Nm (115 lb-in).
10. NOTE: The engine harness must be positioned between the glow plug module bracket and the heater supply tube.
Position the engine wiring harness and install the bolt.
-
Tighten to 13 Nm (115 lb-in).
11. Connect the glow plug module electrical connectors. Connect the pin-type retainers.
12. Connect the LH fuel charging harness electrical connector and pushpin retainer.
13. Connect the EOT and EOP sensor electrical connectors.
