F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
3. Remove the EGR-OC pipe bracket-to-cylinder head bracket bolt and washer. Remove the EGR-OC pipe bracket-to-LH cylinder head bolt,
washers and the bracket.
-
Discard the bolts.
4. Remove the RH turbocharger inlet pipe-to-EGR-OC pipe bolts and the EGR-OC-to-turbocharger bracket bolts.
-
Discard the bolts.
5. Remove the EGR-OC-to-EGR cooler bolts and position the EGR-OC pipe to the left side of the vehicle and aside.
-
Discard the bolts and gaskets.
6. Remove Exhaust Gas Temperature (EGT) sensor from the RH turbocharger inlet pipe and position aside.
7. Remove the RH turbocharger inlet pipe-to-exhaust manifold nuts.
-
Discard the nuts.
8. Remove the RH turbocharger inlet pipe-to-turbocharger bolts.
-
Discard the bolts.
9. Remove the RH turbocharger inlet pipe from the vehicle.
-
Discard the gaskets.
Installation
NOTICE: Do not bend or twist the exhaust gas recirculation (EGR)-Oxidation Catalytic Converter (OC) pipe or damage to the bellow on the
EGR-OC pipe may occur.
NOTICE: Do not bend or twist the turbocharger inlet pipe or damage to the bellow on the turbocharger inlet pipe may occur.
1. Install the RH turbocharger inlet pipe-to-exhaust manifold gasket and position the RH turbocharger inlet pipe.
2. Position a new RH turbocharger inlet pipe-to-turbocharger gasket and loosely install new bolts.
