F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
18. Install the glow plug module heat shield and 3 new pushnuts.
19. Install the turbocharger inlet pipes. Carry out the Exhaust Gas Recirculation (EGR)-Oxidation Catalytic Converter (OC) and Turbocharger Inlet
Pipes - 6.4L Diesel, Body Off procedure.
20. Bleed the low-pressure and high-pressure fuel system.
21. NOTE: Clearing the DTCs or Keep Alive Memory (KAM) does not reset the adaptive values in the PCM.
If the high-pressure fuel injection pump was replaced, clear the fuel injector adaptive tables from the PCM, using the scan tool.
