F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Fuel/Water Separator: Description and Operation
Engine Control Components
ENGINE CONTROL COMPONENTS
Fuel Conditioning Module
The internal components of the fuel conditioning module include the following:
-
electric fuel pump
-
10 micron fuel filter and water separator
-
water in fuel (WIF) sensor
-
recirculation thermostat
The electric fuel pump draws fuel from the fuel tank through the 1.27 cm (1/2 inch) fuel supply line. When the fuel enters the fuel conditioning
module it flows through the 10 micron fuel filter which separates particles and removes water from the fuel. The separated water collects at the bottom
of the pump. If enough water is collected, the WIF sensor detects it and the PCM turns the WIF indicator ON. The conditioned fuel is then delivered
to the secondary fuel filter.
The unused fuel returns from the secondary fuel filter through the 0.95 cm (3/8 inch) fuel return port and enters the unfiltered side of the fuel
conditioning module Depending on the fuel temperature returning from the secondary fuel filter, the recirculation thermostat directs the fuel to the fuel
tank or through the fuel conditioning module back to the inlet of the primary filter.