F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Release/Service and Repair/Fuel System Pressure Release or Fuel System Pressure Release - Diesel Engine See: Fuel Filter/Fuel Pressure
Release/Service and Repair/Fuel System Pressure Release.
2. Disconnect the battery ground cable.
3. If equipped, disconnect the safety clip from the fuel tube.
4. Install the Spring Lock Coupling Disconnect Tool and push into the spring lock coupling.
5. Separate the spring lock coupling ends.
Connect - Type II
1. Inspect and clean both spring lock coupling ends.
2. NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
NOTE: Lubricate the spring lock coupling with clean engine oil to ease assembly.
Align and push the fuel tube spring lock coupling until a click is heard.
3. Pull on the spring lock coupling to make sure it is fully seated. If equipped, install the safety clip.
