F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
7. NOTICE: Be careful not to damage the manual control lever bore.
Remove the manual control lever shaft assembly.
8. Remove the TR sensor and detent lever assembly.
1. Remove the bolts.
2. Remove the TR sensor and detent lever assembly.
3. Disconnect the park rod from the detent lever assembly.
Installation
1. Install the TR sensor and detent lever assembly.
1. Connect the park rod to the detent lever assembly.
2. Install the TR sensor and the detent lever assembly.
3. Loosely install the bolts.
2. Install the manual control lever shaft.