F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Alternator: Service and Repair
Generator - Dual Generator
Generator - 6.4L Diesel, Dual Generator
Removal and Installation
NOTE: This procedure applies to the primary (lower) and/or secondary (upper) generator of the dual generator system.
Both generators
1. Disconnect the batteries.
2. Remove the air cleaner assembly.
Primary generator
3. Remove the fender splash shield.
Secondary generator
4. Loosen the RH Charge Air Cooler (CAC) tube clamp at the intake throttle adapter and position the CAC tube aside.
-
To install, tighten to 8 Nm (71 lb-in).
Both generators
5. Rotate the accessory drive belt tensioner clockwise and remove the drive belt from the generator pulley.
6. Remove the nut(s) and position the generator B+ terminal(s) aside.