F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Starter Drive/Bendix: Testing and Inspection
Starter Motor Drive Gear and Flywheel Ring Gear Inspection
1. Remove the starter motor. For additional information, refer to Starter Motor See: Service and Repair.
2. Check the wear patterns on the starter drive and the flywheel or flexplate ring gear. If the wear pattern is normal, install the starter motor. For
additional information, refer to Starter Motor See: Service and Repair.
3. If the starter drive gear and the flywheel or flexplate ring gear are not fully meshing or the gears are milled or damaged, install a new flywheel or
flexplate and a new starter motor. For additional information, refer to Engine and Starter Motor. See: Engine, Cooling and
Exhaust/Engine/Testing and Inspection See: Service and Repair