F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Shifter M/T: Service and Repair
ZF 6-Speed
Gearshift Lever and Boot
Removal
1. Remove the shift lever boot and position it aside.
2. Loosen the upper gear shift lever bolt, then remove the upper gearshift lever.
3. Remove the 2 screws and the lower shift lever boot.
4. Remove the 4 lower gearshift lever bolts, then remove the lower gearshift lever and shift housing.
5. Separate the lower shift lever and gearshift lever blocks from the shift housing.
Installation
1. Install the lower gearshift lever and gearshift lever blocks into the shift housing.
-
Install the gearshift lever blocks with the notches facing downward.