F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
Back Window Glass: Service and Repair
Window Glass - Rear, Manual Sliding Panel
Window Glass - Rear, Manual Sliding Panel
Removal and Installation
1. Manually position the sliding glass to the full OPEN position.
2. Remove the upper rail filler.
-
Pull down the RH side of the upper filler while carefully sliding it out of the track towards the RH side of the vehicle.
3. Remove the lower rail filler.
-
Pull up the RH side of the lower filler while carefully sliding it out of the track towards the RH side of the vehicle.
4. Push the sliding glass upward and tilt the bottom inward to disengage the sliding glass from the track. Remove the sliding glass panel.
5. To install, reverse the removal procedure.
