F 350 2WD Super Duty V8-6.7L DSL Turbo (2011)
Body / Frame Mount Bushing: Description and Operation
Frame and Body Mounting
The frame is comprised of:
-
steel channel 2-piece rails
-
riveted crossmembers (except for the transmission support crossmember)
-
bolt-in rear crossmember (trailer hitch)
-
bolt-in fifth wheel trailer hitch (optional)
The vehicle body sits on rubber body supports. Lower and upper body supports keep the vehicle body from sitting directly on the frame.
A kit is available to repair the subframe.
For diagonal or X-frame checking, refer to Specifications / Dimensions.
When welding is carried out on the vehicle, refer to Specifications / Welding.
Body Support Mounts
The body support mounts:
-
secure the body to the frame.
-
cannot reuse body support mounting fasteners. Install new fasteners for each fastener that has been removed or loosened.
-
cannot be lubricated during body support mount installation.
Body Support - Front End Sheet Metal (FESM) Mount
Body Support Front End Sheet Metal (FESM) Mount
Body Support - No. 1