F 350 2WD Super Duty V8-6.7L DSL Turbo (2011)
1. Install fifth wheel hitch brackets (align to the locating marks) and install the fifth wheel hitch bracket-to-frame bolts and flag nuts.
-
Tighten to 133 NM (98 lb-ft)
Fifth Wheel Hitch
2. Slide the fifth wheel hitch between the frame and pickup bed (align to the locating marks) and install the fifth wheel hitch-to-frame bolts and flag
nuts.
-
Tighten to 215 Nm (159 lb-ft)
3. Install the fifth wheel hitch-to-bracket bolts and flag nuts.
-
Tighten to 133 Nm (98 lb-ft)
Pickup Bed
4. Remove and discard the pickup bed-to-frame j-nuts and install new fasteners.
5. NOTE: The fifth wheel hitch as well as the fifth wheel brackets are fully adjustable. Height can be adjusted at the frame-to-bracket bolts,
front-to-rear can be adjusted at the hitch-to-bracket bolts and left-to-right can be adjusted at the hitch-to-frame bolts.
Remove the 4 inch by 4 inch wooden blocks and install the pickup bed and new pick up bed bolts.
-
Tighten to 63 Nm (46 lb-ft)