F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
4. Tighten the RH rear bleeder screw, and disconnect the waste line.
5. Repeat Steps 2, 3, and 4 for the LH rear bleeder screw, the RH front disc brake caliper bleeder screw, and the LH front disc brake caliper bleeder
screw, in that order.
6. Connect the New Generation STAR (NGS) (or equivalent scan tool) DCL cable adapter into the vehicle Data Link Connector (DLC) under the
dash, and follow the NGS instructions.
7. Repeat the system bleed procedure as outlined in Steps 1 through 5.
