F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
WSE-M4G323-A1 to the crankcase oil pan flange on the inside of the oil pan bolt holes.
CAUTION: Do not apply excessive amounts of RTV that could enter into the oil lubrication system and cause a restriction.
NOTE: Install oil pan and retaining bolts within 10 minutes of applying RTV sealant.
7. Apply a 6.35 mm (1/4-inch) bead of Silicone Rubber F4AZ-19562-B or equivalent meeting Ford specification ESE-M4G195-A or
WSE-M4G323-A1 to the engine front and engine rear cover flange.
8. Install four temporary locating studs in the oil pan bolt holes.
9. Install the oil pan and eight retaining bolts finger tight.
10. Remove the four temporary locating studs.
11. Install the remaining four oil pan bolts.
12. Install the engine.
