ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3381 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis
Page 2
background image

3. If the concern remains after the inspection connect the New Generation STAR (NGS) Tester to the Data Link Connector (DLC) located beneath

the instrument panel and select the vehicle to be tested from the NGS Tester menu. If the NGS Tester does not communicate with the vehicle:
^

check that the program card is properly installed.

^

check the connections to the vehicle.

^

check the ignition switch position.

If the NGS still does not communicate with the vehicle, go to Pinpoint Test M.  See: Pinpoint Tests/Pinpoint Tests/M: No Module/Network
Communication - No Power to NGS

4. Go to Pinpoint Test PD.  See: Pinpoint Tests/Pinpoint Test PD: Data Link Diagnostic Network Test

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3381 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis