ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3457 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3455
Page 39
background image

-

Overhead Trip Computer (OTC)

2. If the concern remains after inspection, connect the New Generation STAR (NGS) Tester to the Data Link Connector (DLC) located beneath the

instrument panel and select the vehicle to be tested from NGS Tester menu.
If NGS Tester does not communicate with the vehicle:
-

check that the program card is correctly installed.

-

check the connections to the vehicle.

-

check the ignition switch is in RUN position.

If the NGS Tester still will not communicate with the vehicle, refer to Information Bus (Multiplex Communication Network).  See: 

3. Refer to the Symptom Chart.  See: Pinout Values and Diagnostic Parameters/Symptom Chart

Special Tools

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3457 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3455