F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Fuel/Water Separator: Service and Repair
Fuel Filter/Water Separator Removal and Installation
REMOVAL
WARNING: SMOKING OR OPEN FLAME OF ANY TYPE MUST NOT BE PRESENT WHEN WORKING NEAR FUEL OR FUEL
VAPOR.
CAUTION: The fuel system contains pressurized fuel after the vehicle is shut down and will maintain this pressure for a long period of time.
1. Open the fuel filter/water separator drain valve to release the fuel pressure. Completely drain the fuel filter/water separator assembly
2. Disconnect both battery ground cables.
3. Disconnect the fuel supply and fuel return lines.
4. Disconnect the two cylinder head fuel supply lines.
5. Disconnect the electrical connector from the fuel filter/water separator
NOTE: The turbocharger compressor manifold is removed for clarity.
