F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
INSTALLATION
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
1. Install the RH safety belt buckle.
1
Position the safety belt buckle.
2
Make sure the RH safety belt buckle is positioned in the retaining strap.
3
Use the T-55 Torx bit to install the RH safety belt buckle bolt.
2. Install the LH safety belt buckle.
1
Position the LH safety belt buckle.
2
Make sure the LH safety belt buckle is positioned in the retaining strap.
3
Use the T-55 Torx bit to install the LH safety belt buckle bolt.
3. Check the restraint system for proper operation.
Rear - Crew Cab
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL
1. Remove the utility tray, if necessary.
