F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
6. Tighten the radius arm-to-axle bolt and nut to specification.
7. Install the lower spring seat.
8. Install the lower spring insulator.
9. Install the front coil spring.
10. NOTE: Tighten the ball joint nut further, if necessary, in order to insert the new cotter pin.
Using new fasteners, install the front wheel spindle in the front axle.
1
Position the front wheel spindle in the front axle.
2
Install the ball joint nut and tighten to specification.
3
Install the new cotter pin.