F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
8. If vehicle is equipped with a rear suspension stabilizer bar, replace rear stabilizer bar links with new Stabilizer Bar Links (F81Z-5K484-CA, 2
required). Torque stabilizer link nuts to 70±15 N-m (52±11 lb-ft).
9. Bleed rear brake system by referring to the Workshop Manual, Page 206-00-21.
NOTE
FAILURE TO UPDATE THE CENTER BEARING BRACKET (FIGURE 4), IF REQUIRED, MAY RESULT IN DRIVELINE SHUDDER.
10. If necessary, install new center bearing and/or shim (refer to Figure 4 for correct application) assembly as required (Figure 5).
11. For checking driveline angles, refer to Workshop Manual, Page 205-00-14.
12. Adjust headlamp aim by referring to the Workshop Manual, Page 417-01-94.
OTHER APPLICABLE ARTICLES: 98-17-2
SUPERSEDES: 99-9-5
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
991405A
Perform Service Procedure 1.1 Hr.
For Vehicles With 10 cm
(4 Inch) Spacer
991405B
Perform Service Procedure 1.8Hrs.
For Vehicles Without
Spacer
991405C
Extra Time For Center
0.6 Hr.
Bearing Replacement (If
Required)
DEALER CODING
BASIC PART NO.
CONDITION CODE
18125
12
OASIS CODES: 304000, 305000