F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
11. CAUTION: Check the splines on the pinion stem to be sure they are free of burrs. If burrs are evident, remove them by using a fine
crocus cloth, working in a rotational motion. Wipe the pinion clean.
NOTE: The same differential pinion bearing used in the following procedure must be used in the final assembly of the axle.
NOTE: Make sure the press load is not applied to the bearing cage.
Place the selected shim(s) on the pinion and press the bearing until it is firmly seated on the shaft. using the Pinion Bearing Cone Replacer and the
Axle Bearing/Seal Plate.
12. Place a new collapsible spacer on the pinion shaft against the pinion stem shoulder.
