F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Slip Yoke: Service and Repair
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vice or a similar holding fixture.
Place the driveshaft onto a suitable workbench.
2. Index mark the driveshaft slip yoke to the stub shaft.
3. Remove the driveshaft slip yoke.
1
Cut and discard the driveshaft slip yoke boot clamps.
2
Separate the driveshaft slip yoke from the stub shaft.