F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Flywheel: Service and Repair
Flywheel Housing to Block Dowels
Removal
1. NOTE: Take care not to damage the flywheel housing to block dowel holes or surface areas around the flywheel housing to block dowel hole
during removal.
Remove the Dowels using a drift pin where the flywheel housing to block dowel is installed in an open hole and locking pliers where the flywheel
housing to block dowel is installed in a blind hole.
Installation
1. NOTE: Care should be taken to drive the flywheel housing to block dowel squarely into place until fully seated without damaging the
surrounding surface areas.
Install all flywheel housing to block dowels by driving them into place using a brass or plastic mallet.
