F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Front Door Window Regulator: Service and Repair
Manual Window Regulator
REMOVAL
1. Remove the window switch.
2. Remove the window crank handle.
1
Position the window crank handle cover aside.
2
Remove the window crank handle retaining screw and the window crank handle.
3. Remove the door trim panel and watershield.
4. Remove the window from the window regulator.
NOTE: Do not remove the window glass from the door.
5. Tape the window glass in the full up position.
6. Loosen the window regulator arm retaining nuts and pull the arm from the mounting position.
7. Loosen the window regulator mounting bolts and remove the window regulator.
INSTALLATION
