F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
6. Install air conditioner.
7. Start the engine, then check and adjust the ignition timing (refer to the engine decal for correct settings). Connect the distributor and intake
manifold vacuum hoses.
8. Install push rods in their original positions.
9. Install upper intake manifold and throttle body as an assembly.
10. Install valve covers
11. Install timing chain and engine front cover.
12. Connect upper radiator hose and lower radiator hose.
13. Connect transmission oil cooler lines, if so equipped.
14. Install radiator and fill cooling system.
15. Operate the engine at fast idle and check all hose connections and gaskets for leaks. Retighten intake manifold bolts and nuts to 31-34 Nm (23-25
ft. lbs.).
