F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
The A/C evaporator housing is attached to the engine side of the dash panel.
The A/C evaporator case is a two-piece molded construction, one piece of which forms a cover over the A/C evaporator core. A bolt on the A/C vacuum
reservoir tank and bracket is part of the cover housing. This A/C vacuum reservoir tank and bracket and the vacuum control motor, which operates the
outside/recirc. air door, are linked through an A/C vacuum check valve to a hose that supplies engine vacuum.
A/C BLOWER HOUSING
The A/C blower housing is an integral part of the A/C evaporator case. It houses the blower motor and attaches to the A/C evaporator case through a
mounting flange on the blower motor.
The heater blower motor switch resistor is attached to the A/C evaporator case with its thermal elements extending into the air stream inside the A/C
evaporator case. The suction accumulator/drier is attached to the A/C evaporator core by a support bracket.
