F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
2. Install four screws attaching four mounting brackets to radiator support. Tighten screws to 14-19 Nm (11-14 lb-ft).
3. Move radiator into correct installed position and install bolts to upper retaining brackets.
4. Connect upper radiator hose to radiator and fill cooling system to specified level.
5. Using a new O-ring lubricated with clean refrigerant oil, connect A/C manifold and tube discharge line to A/C condenser core. Tighten connection
to 7-13 Nm (62-115 lb-in).
6. Connect condenser to evaporator tube to A/C condenser core using a new O-ring lubricated with clean refrigerant oil. Tighten connection to 21-27
Nm (15-20 lb-ft).
7. Leak test, recover, evacuate, and charge system following recommended service procedures. Observe all safety precautions. See: Service and
Repair
8. Check system for proper operation.
9. Check for leaks.