F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Install the mounting brackets and the damper as shown in Figures 9, 10, 11, and 12.
1.
When locating the mounting bracket on the steering linkage, turn the wheels to either a full LH or RH lock position.
2.
Locate the mounting bracket so the damper has an approximate 12.7 mm (0.5') of additional travel before the damper's maximum amount of travel,
as shown in Figure 9.
3.
Turn the wheels to the opposite lock position and check the damper travel to be sure the maximum amount of travel has not been reached. The
damper should not prevent the wheels from reaching their lock-to-lock turning positions.
4.
Tighten all bolts as shown in Figures 8, 10, 11 and 12, depending on which vehicle you are repairing.
