F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Hose/Line HVAC: Service and Repair
A/C Discharge Hose/Line
Inspection and Assembly Requirements
NOTE: Any time a hose or component connection leak is observed, to correctly service the leak, the connector fitting must be separated, cleaned and a
new O-ring installed. The O-ring and connector surfaces should be lubricated with clean refrigerant oil prior to assembly.
O-ring seal surfaces must be free of dirt, lint, burrs and scratches.
All O-rings must be lubricated with clean refrigerant oil immediately prior to installation.
Removal and Installation
For the removal and installation procedure of the A/C compressor to condenser discharge line, refer to A/C Suction Hose/Line Removal and Installation.
See: A/C Suction Hose/Line/Removal and Installation
Air Conditioning System
Refer to the Air Conditioning System illustration to view a diagram of a typical refrigerant line installation.
