F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Evaporative Emissions Hose: Service and Repair
REMOVAL
1. Disconnect the hose clamps from both ends of the evaporative emission hose or tube to be removed.
2. Remove the evaporative emission hose from the component. Do not pull on the hose without firmly holding the component in place.
3. Disconnect the hose from all retainers and remove from the vehicle.
INSTALLATION
NOTE: When replacing the evaporative emission hose or tube, use original equipment size and length.
1. Follow removal procedure in reverse order.
2. Inspect the evaporative emission hose and adjust it to remove any crimps and restrictions.
