F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Air Filter Element: Service and Repair
REMOVAL
1. Loosen hose clamp(s) securing hose assembly to engine air cleaner.
2. Remove screws attaching engine air cleaner to bracket.
3. Disconnect hose and inlet tube from air closure hose/filter pack, where required.
4. Remove screws retaining air cleaner cover, where required.
5. Remove air filter and tubes.
INSTALLATION
1. Set air cleaner element into proper position.
2. Position air cleaner cover to tray. Make sure air cleaner element is seated while positioning cover.
3. Install screws to secure cover, where required.
4. Install bolts to secure engine air cleaner to support bracket.
5. Install fresh air inlet tube to air closure hose/filter pack, where required.
6. Install air supply tube to engine air cleaner and retain with clamp(s).
