F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Turn Signal Switch: Description and Operation
The multi-function switch is mounted to the LH side of the steering column and controls the following:
^
turn signal
^
windshield wiper/washer control
^
headlamp dimmer/flash-to-pass
^
Turn Signal
The turn signal lever is located on the left side of the upper steering column shroud. To operate the turn signal(s), the key must be in the RUN position.
To indicate a normal full turn, move the turn signal lever to the end-of-travel position for the turn desired. The turn signal lever will remain in position
without effort until the turn is completed, at which time the steering wheel cancel cam will automatically cancel the turn signal.
The turn signal system also has a lane change feature. To operate the lane change feature, move and hold the turn signal lever to the first stop position.
When the lane maneuver is completed, release the turn signal lever and it will return to its normal position.
