F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Windshield Washer Switch: Description and Operation
The multi-function switch is mounted to the LH side of the steering column and controls the following:
^
turn signal
^
windshield wiper/washer control
^
headlamp dimmer/flash-to-pass
^
Turn Signal
The washer switch is located at the end of the turn signal lever. To operate the washer, the key must be in the RUN position. To actuate the washer, push
the end of the multi-function switch in toward the center of the steering column. Releasing the button will then turn off the washer. The windshield wiper
blades will continue to operate for a few wipes and then will automatically return to the wiper speed setting (OFF, LO, HI or INT) previously selected.
Washer operation is available in all positions of wiper operation.
