F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
CAUTION: If these tightening procedures are not followed, life of the front suspension upper ball joint and front suspension lower arm ball joint
will be reduced.
8. Assemble the front wheel spindle and axle shaft.
9. Install the disc brake caliper.
10. Connect the steering arm (tie rod or connecting rod) to the steering knuckle. Tighten the retaining nut to 70-100 Nm (52-74 ft. lbs.).
11. Install the tire and wheel.
12. Remove the safety stands and lower the vehicle.
