F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Power Steering Bleeding: Service and Repair
Air Bleeding
If bubbles are present in the power steering fluid, bleed the system as follows:
1. Fill power steering oil reservoir.
2. Run engine until fluid reaches normal operating temperature of 74-79° C (165-174° F).
3. Turn steering wheel all the way to the left and right several times.
CAUTION: Do not hold steering wheel in the far left or right position; damage to power steering pump can result.
4. Check fluid level.
5. If air is still trapped in system, refer to Purging Power Steering System of air.