F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Tires: Technician Safety Information
WARNING:
^
NEVER RUN THE ENGINE WITH ONE WHEEL OFF THE GROUND, FOR EXAMPLE, WHEN CHANGING A TIRE. THE
WHEEL RESTING ON THE GROUND COULD CAUSE THE VEHICLE TO MOVE.
^
THE TIRE AND WHEEL MUST ALWAYS BE PROPERLY MATCHED. IT IS VERY IMPORTANT TO DETERMINE THE SIZE OF
EACH COMPONENT BEFORE ANY ASSEMBLY OPERATIONS COMMENCE. DO NOT MOUNT A 16-INCH TIRE ON A
16.5-INCH WHEEL. FAILURE TO ADHERE TO THESE INSTRUCTIONS COULD RESULT IN AN EXPLOSIVE SEPARATION
AND CAUSE SERIOUS BODILY INJURY OR DEATH. DO NOT MOUNT A 16.5-INCH TIRE ON A 16-INCH WHEEL. THE TIRE
WILL COME OFF WITHOUT WARNING.
^
Follow the safety procedures described in this manual and obtain safety literature from the wheel and rim manufacturer, NHTSA or OSHA. If you
have any questions, consult the distributor or manufacturer directly. The load-carrying requirements of each vehicle also must be determined
before selecting the proper tire/wheel combination.
^
Always remember the weakest weight-carrying component of the vehicle (i.e., tire, wheel, axle bearings, etc.) determines its overall maximum and
safe load carrying capacity for the vehicle.
^
When replacing tires, use the same size, load range and construction type (bias, bias belted or radial) as originally installed on the vehicle, of a
type that meets Ford specifications for the vehicle.
NOTE: If the tire is to be reinstalled on an original equipment wheel, mark the tire at the valve stem hole so it can be reassembled in the same
relative position.
^
When replacing wheels, use original equipment manufacturer's wheels or equivalent available from your Ford dealer with equivalent capacity,
width, offset and mounting configuration as those originally installed on your vehicle.
NOTE: Use of improper replacement wheels and tires may adversely affect ride, handling, load carrying capacity, wheel bearing life, tire
clearance to body and chassis components, vehicle ground clearance vehicle width and brake cooling.
^
When changing tires, remove the wheel and tire assembly from the vehicle. Changing tires with the wheel on the vehicle is hazardous, more
difficult, and takes more time.
^
In servicing all tires, use caution not to drop them (or the wheels or assemblies) on your feet, hands or body, or heavily on the floor.
^
Practice good methods of lifting; use your legs as well as your arms and your body. This will help to prevent painful internal injury.
^
When carrying tires or wheels, do not step in oil or grease. Keep the floor clean and dry.
