F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
2. Remove the selective coast clutch pressure plate retainer snap ring.
3. Remove the (A) coast clutch pressure plate and the (B) clutch plates.
NOTE: Tag the parts for identification during installation.
4. Using the (A) Clutch Spring Compressor, compress the (B) coast clutch piston return spring and remove the (C) coast clutch piston return spring
retaining ring. Remove the tool. Discard the retaining ring.
CAUTION: Do not fully compress the return springs.
5. Remove the coast clutch piston return spring.
