F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
6. Remove the coast clutch piston apply ring.
7. Remove the coast clutch piston.
8. Remove the coast clutch piston outer seal.
9. Remove the coast clutch piston inner seal.
ASSEMBLY
NOTE:
-
Soak all friction clutch plates for 15 minutes in clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent
meeting FORD specification.
-
Prior to installation, lightly lubricate all O-ring seals with clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or
equivalent meeting FORD specification.
