F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
11. Install the bottom end cap.
NOTE: The top and bottom end caps are identical.
12. Install the (A) intermediate one-way clutch over the inner race. Install the (B) top end cap.
NOTE: The (A) lip on the intermediate one-way clutch must face upward.
13. Install the intermediate one-way clutch outer race.
NOTE:
-
The shoulder on the outer race must face upward.
-
When installed, the outer race must rotate counterclockwise.
14. Install the No. 8A intermediate brake drum thrust washer, engaging the (A) tabs with the (B) slots.