F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
The new design case has a plastic lubrication plug in the rear of the case (Figure 1). The new design extension housing has a cast-in shoulder boss
(Figure 2) that keeps the lubrication plug in place. The new extension housing must be used with cases that have the lubrication plug.
NOTE:
DO NOT USE AN EXTENSION HOUSING WITHOUT THE CAST-IN SHOULDER OR BOSS ON ANY CASE HAVING THE
LUBRICATION PLUG AS TRANSMISSION DAMAGE MAY RESULT
The new design extension housing with the cast-in shoulder or boss will service any E4OD case (past or present). The previous design extension housing
without the cast-in shoulder or boss (Figure 2) can only be used on transmission cases built prior to 7/24/97 not having the lubrication plug.
CAUTION:
BE SURE TO USE ONLY THE NEW DESIGN EXTENSION HOUSING WITH THE TRANSMISSION CASES CONTAINING THE
LUBRICATION PLUG.
PART NUMBER
PART NAME
F7TZ-7AO39-AA
Extension Housing
F7UZ-7A039-BA
Extension Housing
F85Z-7A039-DA
Extension Housing
F7UZ-7005-BA
Transmission Case
F75Z-7005-BB
Transmission Case
F81Z-7E380-AA
Lubrication Plug
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 501000, 502000, 503000, 504000
