F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
INSTALLATION
1. Position clutch slave cylinder over transmission input shaft with bleed screw and coupling facing left side of transmission.
2. Install the cylinder clutch slave retaining bolts and tighten to 19-26 Nm (14-19 ft. lbs.).
3. Install the transmission.
4. Insert male coupling into female coupling on the clutch slave cylinder. Make sure the connection is secure.
5. Bleed the clutch hydraulic system as required See: Clutch Fluid/Service and Repair.
