F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Hydraulic Hose: Service and Repair
REMOVAL
1. Remove retainer pin from clutch master cylinder holding clutch slave cylinder to clutch master cylinder tube in place.
CAUTION: Make sure hydraulic tube connection is free of contamination prior to disconnecting it.
NOTE: Prior to removal, verify routing of the clutch slave cylinder to clutch master cylinder tube.
2. Raise and support vehicle.
3. Disconnect clutch slave cylinder to clutch master cylinder tube from external clutch slave cylinder. On vehicles equipped with concentric clutch
slave cylinder, disconnect tube using Clutch Coupling Tool T88T-70522-A.
CAUTION: Make sure hydraulic tube connection is free of contamination prior to disconnecting it.
INSTALLATION
