F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
70-100 Nm (52-74 ft. lbs.). Install cotter pins. If necessary, advance nut to next castellation to install cotter pin.
8. Connect front stabilizer bar link to front stabilizer bar. Tighten to 21-33 Nm ( 15-24 ft. lbs.).
9. If removed, position front stabilizer bar and stabilizer bar bracket on axle shaft housing, and tighten nuts to 48-68 Nm (35-50 ft. lbs.).
10. Install disc brake calipers and part of front disc brake hub and rotors (1102).
11. Install the wheels and tires assemblies on the vehicle.
12. Check and fill axle lubricant.
13. Lower the vehicle to the ground.
