F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
27. Position the Pinion and Carrier Bearing Puller.
28. Use the Pinion and Carrier Bearing Puller to remove the differential bearing.
^
Repeat the procedure for the other side.
29. Install the new differential bearings.
1
Position the appropriate differential bearing (RH or LH).
2
Use the appropriate press to install the differential bearing.
^
Repeat the procedure for the other differential bearing.
NOTE: Press against the differential bearing inner cone only.
30. Install the differential case in the housing without the ring gear.
1
Position the differential case.
2
Install the bearing caps.
3
Install the bearing cap bolts.
