F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
2
Check and note the differential case runout.
NOTE: See the specification chart for maximum differential case runout.
24. Remove the bearing caps.
1
Remove the bearing cap bolts.
2
Remove the bearing caps.
25. Remove the differential case from the housing.
NOTE: If runout is within specification, install a new ring gear and pinion. If runout exceeds specification, the ring gear is true and the concern is
due to either a damaged differential case or differential bearings. Inspect the differential bearings. If the differential bearings are not damaged,
replace both the differential case and the differential bearings.
26. Assemble the Pinion and Carrier Bearing Puller.
