F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
25. Insert three compression springs with each pressure piece (part of small parts repair kit) in the recesses of the synchronizer.
CAUTION: If the original springs are not being replaced, inspect them before reuse.
26. Place the 2nd gear synchronizer ring (part of synchronizer) on the 1st-2nd synchronizer body.
NOTE: The short lugs on the synchronizer ring should be located over the gaps in the 1st-2nd synchronizer body.
27. Push the synchronizer ring downwards while pulling the sliding sleeve into the center position.
28. Place the second speed gear bearing on the mainshaft.
