F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
beneath the outer race of the tapered roller bearing which seats in the case.
NOTE: Always replace the baffle plate with a new one when removed.
5. Apply Gasket Maker E2AZ-19562-B or equivalent meeting Ford specification WSK-M2G348-A5 to the mating surfaces of the case and extension
housing.
CAUTION: Do not use silicone.
6. Position the case on the extension housing. Install all of the screws that secure the case and extension housing and tighten to 23 Nm (17 Ft lbs.).
Input shaft and mainshaft should turn freely by hand after preload adjustment.