F 350 4WD Pickup V8-6.9L DSL (1983)
Extension Housing: Technical Service Bulletins
Extension Housing Bolts - Revised Service Procedure
Article No. 83-6-11
TRANSMISSION - AUTOMATIC - AOD - ANEROBIC SEALANT ON EXTENSION HOUSING BOLTS
FORD 1983 FORD, LTD, T-BIRD
LINCOLN-MERCURY 1983 MERCURY, MARQUIS, LINCOLN, MARK VII, CONTINENTAL, COUGAR
LIGHT TRUCKS 1983 E & F-SERIES
The #3, #4 and #5 extension housing bolts are now pre-coated with Dri-Loc Anerobic Sealant in production. Revised service procedures are provided for
reinstalling these extension housing to main case bolts - removal and recoating of thread sealant.
FIGURE 17
In the event service requires removing and reinstalling the extension housing bolts (#3, #4, and #5 bolts), refer to Figure 17 for locations.
The following is the revised procedure:
^
Wire brush the bolts and case bolt holes.
^
Remove as much loose sealant as possible.
^
Recoat the bolt with either Threadlock and Sealer (E0AZ-19554-A), Pipe Sealant with Teflon (D8AZ- 19554-A), or Teflon Tape.
^
Torque the bolts to specifications (16-20 lbs.ft. or 22-27 N-m).
PART NUMBER
PART NAME
CLASS
E0AZ-19554-A
Threadlock and Sealer
A
D8AZ-19554-A
Pipe Sealant with Teflon
AM
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
